shandong KNJ Bearing Co.,Ltd.
+86-13963009636
shandong KNJ Bearing Co.,Ltd.
The secondary reasons for the appearance of scratches on the outer spherical bearing in the process of installation are: the inner ring and outer ring of the bearing are skewed during installation and assembly; Or it may be the emerging charge load in the
Thin wall bearing not only realizes the extremely thin bearing section, but also realizes the miniaturization and lightweight of products. The diversity of products expands its scope of use. The specific maintenance methods are as follows:1. Remove the be
In case of failure in the application of outer spherical bearing, what should we start from? Let's take a look at the following:1. Temperature of maintenance bearing:Generally, the temperature of the outer spherical bearing increases slowly with the start
The cleaning quality of the bearing depends on the hand feel inspection. After the bearing is cleaned, carefully observe that there is always some residual oil in the gap between the inner and outer race raceway, rolling element and cage. During inspectio
The shaft is supported by two bearings in radial and axial directions. The bearing on one side is called fixed end bearing. It bears radial and axial loads and plays the role of fixing the relative axial displacement between the shaft and the bearing hous
The sealing of the bearing is to keep the self-aligning roller bearing in good lubrication conditions and normal working environment, give full play to the working performance of the bearing and prolong the service life. The rolling bearing must be proper
Tapered roller bearing belongs to separate bearing, and the inner and outer rings of the bearing have tapered raceways. This type of bearing is divided into single row, double row and four row tapered roller bearings according to the number of rows of rol
Rolling sound and its control method of outer spherical bearing with seat rolling sound is a harsh metal friction sound that can occur in cylindrical roller bearing on all occasions. It mostly occurs in large grease lubricated bearings, but it is more lik
Technical points and precautions of outer spherical bearing:1、 Dismantle1. First loosen the locking screw on the bearing eccentric sleeve with an Allen wrench, then insert a small iron rod into the counterbore on the top cover eccentric sleeve, and loosen
The common installation tools of rolling bearings include hammer, copper rod, sleeve, special backing plate, screw mosquito fixture, press, etc. the measuring tools include vernier caliper, micrometer, dial indicator, etc., but different tools should be s
KNJ BEARING