How to install the outer spherical ball bearing?

How to install the outer spherical bearing:
1. before installing the bearing on the shaft, the fixing pin of the bearing jacket must be pulled off, and the surface of the journal shall be polished and clean, and the journal shall be coated with oil, rust proof and lubrication (it is allowed to rotate the bearing slightly on the shaft).
2. apply lubricating oil on the mating surface of bearing seat and bearing, and install the bearing into the bearing seat. Then, the assembled bearing and bearing pedestal are set on the shaft. Push to the required position for installation.
3. do not tighten the bolts fixing the bearing pedestal, and make the bearing shell rotate in the bearing pedestal. Also install the other end bearing and seat on the same shaft, rotate the shaft for several turns, and make the bearing itself automatically align the position. Then fasten the bearing seat bolts.
4. install eccentric sleeve. First, the eccentric sleeve is set on the eccentric step of the bearing inner sleeve, and then the small iron rod is inserted or counter the counterbore of the eccentric sleeve by hand. The small iron rod is hit along the axis rotation direction with the hammer to make the eccentric sleeve firmly installed and finally the hexagon screw on the eccentric sleeve is locked.